CIGARETTE LIGHTER > INSTALLATION |
| 1. INSTALL CIGARETTE LIGHTER ASSEMBLY |
![]() |
Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
Connect the connector.
| 2. INSTALL CIGARETTE LIGHTER COVER |
![]() |
Attach the 2 claws to install the cigarette lighter cover.
| 3. INSTALL SWITCH BASE |
Connect the connectors.
Attach the 9 claws and guide to install the switch base.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |