Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER

CIGARETTE LIGHTER > INSTALLATION

for Preparation Click here



1. INSTALL CIGARETTE LIGHTER ASSEMBLY


    B110252
  1. Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.

  1. Connect the connector.



2. INSTALL CIGARETTE LIGHTER COVER


B085605E06
  1. Attach the 2 claws to install the cigarette lighter cover.



3. INSTALL SWITCH BASE
  1. Connect the connectors.

  1. Attach the 9 claws and guide to install the switch base.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).