CIGARETTE LIGHTER > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SWITCH BASE |
![]() |
Detach the 9 claws and guide.
Disconnect the connectors and remove the switch base.
| 3. REMOVE CIGARETTE LIGHTER COVER |
![]() |
Detach the 2 claws and remove the cover.
| 4. REMOVE CIGARETTE LIGHTER ASSEMBLY |
![]() ![]() |
Rotate the socket to disengage the notch.
Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.
Remove the socket from the cover.