Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER

CIGARETTE LIGHTER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE SWITCH BASE


B278245
  1. Detach the 9 claws and guide.

    HINT:
    If the claws are difficult to detach, detach the claws from the back of the switch base.

  1. Disconnect the connectors and remove the switch base.



3. REMOVE CIGARETTE LIGHTER COVER


    B085605E06
  1. Detach the 2 claws and remove the cover.



4. REMOVE CIGARETTE LIGHTER ASSEMBLY


    E003722
    B108949
  1. Rotate the socket to disengage the notch.

  1. Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.

  1. Remove the socket from the cover.