DOOR CONTROL RECEIVER > REMOVAL |
| 1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
| *1 | Stopper |
![]() |
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
| *1 | Hinge |
| 2. REMOVE DOOR CONTROL RECEIVER |
![]() |
Remove the nut.
| *A | for LHD |
| *B | for RHD |
![]() |
Disconnect the connector.
Detach the clamp and remove the door control receiver.
| *A | for LHD |
| *B | for RHD |