Home › ENGINE · 2KD-FTV › ENGINE CONTROL SYSTEM › INTAKE AIR TEMPERATURE SENSOR

INTAKE AIR TEMPERATURE SENSOR > INSPECTION

for Preparation Click here



1. INSPECT INTAKE AIR TEMPERATURE SENSOR



A253476E01


Text in Illustration 
*1
Resistance
*2
Temperature
*3
Acceptable Range
-
-
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    2.21 to 2.65 kΩ

    If the result is not as specified, replace the intake air temperature sensor.

    NOTICE:
    When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.