Home › ENGINE ยท 2KD-FTV › ENGINE MECHANICAL › ENGINE UNIT

ENGINE UNIT > REPAIR

for Preparation Click here



1. BORE CYLINDER

HINT:
  1. Bore all 4 cylinders for the O/S piston outside diameter.
  2. Replace all the piston rings with ones to match the O/S pistons.

  1. Prepare 4 new O/S pistons.

    Standard Piston Diameter:
    92.42 to 92.45 mm (3.6386 to 3.6398 in.)



    A253957E01
  1. Using a micrometer, measure the piston diameter according to the following conditions: 1) measure at a right angle to the piston center line, and 2) measure at the indicated distance from the piston head.

    Distance:
    65 mm (2.56 in.)

    Text in Illustration 
    *1
    Size Mark
    *2
    Piston Pin Hole Inside Diameter Mark
    *3
    Front Mark (Arrow)
    *4
    Distance

  1. Calculate how much each cylinder needs to be rebored:

    Size to be rebored:
    Size to be rebored = P + C - H
    P = Piston diameter
    C = Piston clearance: 0.07 to 0.09 mm (0.00276 to 0.00354 in.)
    H = Allowance for honing: 0.02 mm (0.000787 in.) or less

  1. Bore and hone the cylinders to the calculated dimensions.

    Maximum honing:
    0.02 mm (0.000787 in.)

    NOTICE:
    Excess honing will destroy the finished roundness.