Home › ENGINE ยท 1GR-FE › COOLING › FAN

FAN > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE UNDER COVER
  1. Remove the 4 bolts and under cover.



2. DRAIN ENGINE COOLANT


  1. Remove the radiator cap.


    A110401E01

  1. Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



3. DISCONNECT RADIATOR HOSE INLET


4. DISCONNECT RADIATOR HOSE OUTLET


5. REMOVE FAN SHROUD


    A110406
  1. Remove the 3 bolts and oil reservoir.

  1. Disconnect the reservoir hose from the radiator tank upper.

  1. Loosen the 4 nuts holding the fluid coupling fan.

  1. Remove the drive belt .

  1. Remove the 2 bolts holding the fan shroud.

  1. Remove the 4 nuts holding the fluid coupling fan, and then remove the shroud together with the fluid coupling fan.

    NOTICE:
    Be careful not to damage the radiator core.

  1. Remove the fan pulley from the water pump.



6. REMOVE FAN


    A112113
  1. Remove the 4 nuts and fan from the fluid coupling.