Home › ENGINE · 5L-E › ENGINE CONTROL SYSTEM › INTAKE AIR TEMPERATURE SENSOR

INTAKE AIR TEMPERATURE SENSOR > INSPECTION

for Preparation Click here



1. INSPECT INTAKE AIR TEMPERATURE SENSOR


  1. Measure the resistance between the terminals.

    Standard resistance:
    2.09 to 2.81 Ω at 20°C (68°F)



    A111781E01

    If the result is not as specified, replace the intake air temperature sensor.

    NOTICE:
    When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.