WASHER MOTOR > ON-VEHICLE INSPECTION |
| 1. CHECK WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Remove the washer jar.
Disconnect the windshield washer motor and pump connector.
Fill the washer jar with washer fluid.
![]() |
Connect the battery's positive (+) lead to terminal 1 of the washer motor and pump, and the negative (-) lead to terminal 2.
Check that washer fluid flows from the washer jar.
| 2. CHECK REAR WASHER MOTOR AND PUMP ASSEMBLY |
Remove the washer jar.
Disconnect the rear washer motor and pump connector.
Fill the washer jar with washer fluid.
![]() |
Connect the battery's positive (+) lead to terminal 1 of the rear washer motor and pump, and the negative (-) lead to terminal 2.
Check that washer fluid flows from the washer jar.