Home › ENGINE ยท 2KD-FTV › INTAKE › INTERCOOLER

INTERCOOLER > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A252793
  1. Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.
    Text in Illustration 
    V100136
    Cap Nut



2. REMOVE INTAKE AIR TEMPERATURE SENSOR


    A252804
  1. Disconnect the intake air temperature sensor connector.

  1. Using a 22 mm deep socket wrench, remove the intake air temperature sensor.

    HINT:
    Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the intake air temperature sensor each time the intercooler is replaced.



3. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    A211889
  1. Detach the 2 clamps and disconnect the manifold absolute pressure sensor connector.

  1. Disconnect the vacuum hose.

  1. Remove the 2 bolts and manifold absolute pressure sensor sensor.



4. REMOVE INTERCOOLER ASSEMBLY


    A211890
  1. Loosen the 2 hose clamps of the No. 1 air hose.



    A149934
  1. Loosen the 2 hose clamps of the No. 2 air hose.



    A135919
  1. Remove the 4 bolts and intercooler.



    A149931
  1. Remove the 4 bolts, intake air connector and gasket.