Home › ENGINE ยท 1KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A111785
  1. Remove the 3 bolts, 2 nuts and engine cover.



2. REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)


    A250417
  1. Disconnect the 2 connectors.

  1. Disconnect the 3 vacuum hoses.

  1. Remove the 2 bolts and electric vacuum regulating valve together with the bracket.

    NOTICE:
    Do not remove the electric vacuum regulating valve from the bracket.



3. REMOVE VACUUM SWITCHING VALVE (for EGR CUT)


    A112098
  1. Remove the bolt and vacuum switching valve.