GLOW PLUG > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INTAKE PIPE ASSEMBLY |
![]() |
Loosen the 2 intake pipe clamps.
Remove the 2 bolts and intake pipe.
| 3. REMOVE NO. 1 GLOW PLUG CONNECTOR |
Remove the nut and disconnect the glow plug connector wire.
Remove the 4 screw grommets, 4 nuts and glow plug connector.
| 4. REMOVE GLOW PLUG ASSEMBLY |
![]() |
Using a 12 mm deep socket wrench, remove the 4 glow plugs.