Home › ENGINE ยท 5L-E › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP DRIVE GEAR


    A057452E02
  1. Place the timing belt case on wooden blocks.

    NOTICE:
    Do not damage the timing pointer.



    A057459E01
  1. Insert the drive and driven gears into the timing belt case with the marks facing the oil pump cover side.



    A057460E01
  1. Apply adhesive to 2 or 3 threads of the screws.

    Adhesive:
    Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

  1. Install the oil pump cover with the 8 screws.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }



2. INSTALL OIL PUMP RELIEF VALVE
  1. Insert the relief valve and spring into the installation hole of the timing belt case.



    A057453E02
  1. Using a 12 mm hexagon wrench, install a new gasket and the plug.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }