Home › TRANSMISSION ยท A340F AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM

AUTOMATIC TRANSMISSION SYSTEM > TERMINALS OF ECU

for Preparation Click here


HINT:
Each ECU terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration below as a reference for the ECU terminals.


TCM

E118485E15


Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
NSW (T19-12) - E1 (T19-1)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever on P or N
Below 1 V
NSW (T19-12) - E1 (T19-1)
L-Y - BR
Park/neutral position switch signal
Ignition switch ON and shift lever not on P or N
11 to 14 V
STA (T19-11) - E1 (T19-1)
B-Y - BR
Starter signal
Cranking
6 V or more
R (T38-9) - E1 (T19-1)
R-Y - BR
R shift position switch signal
Ignition switch ON and shift lever on R
11 to 14 V
R (T38-9) - E1 (T19-1)
R-Y - BR
R shift position switch signal
Ignition switch ON and shift lever not on R
Below 1 V
D (T38-8) - E1 (T19-1)
G-Y - BR
D shift position switch signal
Ignition switch ON and shift lever on D or 3
11 to 14 V
D (T38-8) - E1 (T19-1)
G-Y - BR
D shift position switch signal
Ignition switch ON and shift lever not on D or 3
Below 1 V
3 (T38-12) - E1 (T19-1)
G-O - BR
3 shift position switch signal
Ignition switch ON and shift lever on 3
11 to 14 V
3 (T38-12) - E1 (T19-1)
G-O - BR
3 shift position switch signal
Ignition switch ON and shift lever not on 3
Below 1 V
2 (T38-11) - E1 (T19-1)
L - BR
2 shift position switch signal
Ignition switch ON and shift lever on 2
11 to 14 V
2 (T38-11) - E1 (T19-1)
L - BR
2 shift position switch signal
Ignition switch ON and shift lever not on 2
Below 1 V
L (T38-10) - E1 (T19-1)
G-R - BR
L shift position switch signal
Ignition switch ON and shift lever on L
11 to 14 V
L (T38-10) - E1 (T19-1)
G-R - BR
L shift position switch signal
Ignition switch ON and shift lever not on L
Below 1 V
S1 (T19-18) - E1 (T19-1)
GR - BR
S1 solenoid signal
1st or 2nd gear
11 to 14 V
S1 (T19-18) - E1 (T19-1)
GR - BR
S1 solenoid signal
3rd gear or O/D
Below 1 V
S2 (T19-17) - E1 (T19-1)
W-L - BR
S2 solenoid signal
2nd or 3rd gear
11 to 14 V
S2 (T19-17) - E1 (T19-1)
W-L - BR
S2 solenoid signal
1st gear or O/D
Below 1 V
SL (T19-16) - E1 (T19-1)
G - BR
SL solenoid signal
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
Pulse generation
(see waveform 1)
SL (T19-16) - E1 (T19-1)
G - BR
SL solenoid signal
Vehicle driving under lock-up condition
11 to 14 V
SLT+ (T19-20) - SLT- (T19-19)
G-Y - L-B
SLT solenoid signal
Engine is idling
Pulse generation
(see waveform 2)
THOC (T19-24) - E2 (T19-23)
BR - B-Y
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
STP (T37-14) - E1 (T19-1)
G-W - BR
Stop light switch signal
Brake pedal is depressed
11 to 14 V
STP (T37-14) - E1 (T19-1)
G-W - BR
Stop light switch signal
Brake pedal is released
Below 1 V
SPD1 (T37-25) - E1 (T19-1)
V-R - BR
Speed signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 3)
NCO+ (T19-3) - NCO- (T19-2)
V - P
Speed sensor (NCO) signal
Engine is idling
Pulse generation
(see waveform 4)
SP2+ (T19-30) - SP2- (T19-29)
R - G
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(see waveform 5)
IG2 (T37-6) - E1 (T19-1)
B-O - BR
Ignition switch
Ignition switch ON
11 to 14 V
L4 (T38-15) - E1 (T19-1)
G-W - BR
L4 transfer switch signal
Ignition switch ON and transfer shift lever on L4
Below 1 V
L4 (T38-15) - E1 (T19-1)
G-W - BR
L4 transfer switch signal
Ignition switch ON and transfer shift lever not on L4
11 to 14 V
TFN (T38-16) - E1 (T19-1)
W-G - BR
N transfer switch signal
Ignition switch ON and transfer shift lever on N
Below 1 V
TFN (T38-16) - E1 (T19-1)
W-G - BR
N transfer switch signal
Ignition switch ON and transfer shift lever not on N
11 to 14 V
CAN+ (T37-21) - E1 (T19-1)
V - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 6)
CAN- (T37-20) - E1 (T19-1)
P - BR
CAN communication line
Ignition switch ON
Pulse generation
(see waveform 7)


    C170572E01
  1. Waveform 1 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    SL (T19-16) - E1 (T19-1)
    Tool Setting
    10 V/DIV., 100 msec./DIV.
    Condition
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)



  2. C170573E01
  3. Waveform 2 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    SLT+ (T19-20) - SLT- (T19-19)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine is idling



  4. C170574E01
  5. Waveform 3 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    SPD1 (T37-25) - E1 (T19-1)
    Tool Setting
    5 V/DIV., 20 msec./DIV.
    Condition
    Vehicle speed 20 km/h (12 mph)



  6. C170570E01
  7. Waveform 4 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    NCO+ (T19-3) - NCO- (T19-2)
    Tool Setting
    5 V/DIV., 0.5 msec./DIV.
    Condition
    Engine is idling



  8. C170571E01
  9. Waveform 5 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    SP2+ (T19-30) - SP2- (T19-29)
    Tool Setting
    2 V/DIV., 2 msec./DIV.
    Condition
    Vehicle speed 20 km/h (12 mph)



  10. C175015E01
  11. Waveform 6 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    CAN+ (T37-21) - E1 (T19-1)
    Tool Setting
    1 V/DIV., 10 msec./DIV.
    Condition
    Ignition switch ON



  12. C175016E01
  13. Waveform 7 (Reference)
    Item
    Content
    Symbols (Terminal No.)
    CAN- (T37-20) - E1 (T19-1)
    Tool Setting
    1 V/DIV., 10 msec./DIV.
    Condition
    Ignition switch ON