DTC P0717/67 Input Speed Sensor Circuit No Signal |
| DTC Code | DTC Detection Condition | Trouble Area |
| P0717/67 |
|
|

| 1.CHECK SPEED SENSOR (INSTALLATION) |
![]() |
Check the speed sensor installation.
|
| ||||
| OK | |
| 2.INSPECT SPEED SENSOR (NCO) |
![]() |
Disconnect the T7 sensor connector from the transmission.
Measure the resistance of the sensor.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | 20°C (68°F) | 560 to 680 Ω |
|
| ||||
| OK | |
| 3.CHECK WIRE HARNESS (SPEED SENSOR (NCO) - TCM) |
![]() |
Disconnect the T19 TCM connector.
Measure the resistance of the wire harness side connector.
| Tester Connection | Condition | Specified Condition |
| T19-3 (NCO+) - T19-2 (NCO-) | 20°C (68°F) | 560 to 680 Ω |
| T19-3 (NCO+) - Body ground | Always | 10 kΩ or higher |
| T19-2 (NCO-) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||