Home › BODY ELECTRICAL › LIGHTING › STOP LIGHT SWITCH

STOP LIGHT SWITCH > INSPECTION

for Preparation Click here



1. INSPECT STOP LIGHT SWITCH ASSEMBLY


E065594E43
  1. Measure the resistance of the switch.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pin not pushed
    Below 1 Ω
    3 - 4
    Pin not pushed
    10 k Ω or higher
    1 - 2
    Pin pushed
    10 k Ω or higher
    3 - 4
    Pin pushed
    Below 1 Ω

    If the result is not as specified, replace the switch assembly.