Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2KD-FTV CHARGING

2KD-FTV CHARGING > SERVICE DATA



Generator
Rated output
12 V 80 A
Voltage regulator
Regulating voltage
13.2 to 14.0 V
Battery
Standard specific gravity
1.25 to 1.29 at 20°C (68°F)
Charging circuit without load
Standard amperage
10 A or less
Standard voltage
13.2 to 14.8 V
(When engine speed at 2000 rpm)
Charging circuit with load
Standard amperage
30 A or more
Generator rotor
Standard resistance
Slip rings
1.8 to 2.8 Ω 20°C (68°F)
Slip ring - rotor
Standard resistance
10 kΩ or higher
Slip ring
Standard diameter
15.3 to 15.5 mm (0.602 to 0.610 in.)
Minimum diameter
14.9 mm (0.587 in.)
Generator regulator assembly
Brush length
Standard exposed length
13.2 mm (0.520 in.)
Minimum exposed length
6.0 mm (0.236 in.)
Generator starter sub-assembly with rectifier
Rectifier terminals
Standard resistance
Below 1Ω