Home › BODY › EXTERIOR › ROOF DRIP SIDE FINISH MOULDING

ROOF DRIP SIDE FINISH MOULDING > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE ROOF DRIP SIDE FINISH MOULDING LH


    B277865E01
  1. Put protective tape around the roof drip side finish moulding.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 2 clips and remove the roof drip side finish moulding.

    NOTICE:
    When removing the roof drip side finish moulding, be careful not to damage the clips.