Home › TRANSMISSION ยท CLUTCH › CLUTCH MASTER CYLINDER

CLUTCH MASTER CYLINDER > REMOVAL

for Preparation Click here



1. DRAIN CLUTCH FLUID

NOTICE:
Wash off clutch fluid immediately if it comes into contact with a painted surface.



2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


B278242
  1. Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.



3. REMOVE COMBINATION METER ASSEMBLY
  1. Remove the combination meter assembly (Click here).



4. DISCONNECT CLUTCH RESERVOIR HOSE


C192311E03
  1. Using pliers, grip the claws of the clip and slide the clip, and then disconnect the clutch reservoir hose.

    HINT:
    Use a container to catch the fluid.



5. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


C192312E03
  1. Using a union nut wrench, disconnect the tube.

    HINT:
    Use a container to catch the fluid.



6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
  1. Remove the clutch pedal (Click here).

  1. Remove the 2 nuts, clutch master cylinder assembly and gasket.



7. REMOVE CYLINDER PUSH ROD CLEVIS
  1. Loosen the lock nut, and then remove the clevis.

  1. Remove the lock nut from the master cylinder.