Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH


B089697E01
  1. Install the seat belt with the nut as shown in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.



2. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH
  1. Install the seat belt with the nut as shown in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.



3. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER LH


B089850E02
  1. Install the seat belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    The anchor part of the seat belt must not overlap the protruding part.



4. INSTALL REAR NO. 1 SEAT RECLINING COVER LH


    B089783E01
  1. Attach the 4 claws to install the reclining cover.

  1. Install the screw.



5. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY LH


B120607E02
  1. Install the seat belt LH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.



6. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY CENTER


B120606E02
  1. Install the seat belt center with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.



7. INSTALL REAR NO. 1 SEAT CUSHION COVER RH


    B133273E01
  1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 4 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.

  1. Install the seat cushion cover (with pad) to the seat cushion frame.

    HINT:
    Make sure that the seat stopper band is not inside the cushion cover.



8. INSTALL REAR NO. 1 SEAT RECLINING COVER RH


    B089781E01
  1. Attach the 3 claws to install the reclining cover.

  1. Install the screw.



9. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH


    B118276
  1. Install the release handle to the rear seat lock through the hole in the rear seat cushion under cover.

  1. Install the seat track adjusting handle.



10. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER RH


B089849E02
  1. Install the seat belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.



11. INSTALL REAR NO. 1 SEAT RECLINING COVER LH


    B089783E01
  1. Attach the 4 claws to install the reclining cover.

  1. Install the screw.