REAR SEAT OUTER BELT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR NO. 2 SEAT BELT ASSEMBLY OUTER RH |
![]() |
Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the bolt as shown in the illustration.
![]() |
Connect the shoulder anchor with the bolt.
Close the cover cap.
| 2. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY OUTER RH |
![]() |
Align the claws with the seat belt positioning holes and install the retractor of the seat belt with the bolt as shown in the illustration.
![]() |
Connect the shoulder anchor with the bolt.
Close the cover cap.
| 3. INSTALL QUARTER INSIDE TRIM BOARD RH |
Detach the 8 claws and 10 clips to install the quarter inside trim board.
Install the clip.
Connect the rear No. 2 seat outer belt floor anchor with the bolt.
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
Attach the 2 claws to install the outer lap belt anchor cover.
| 4. CONNECT REAR NO. 2 SEAT BELT ASSEMBLY OUTER RH |
![]() |
Connect the seat belt's floor anchor with the bolt.
![]() |
Install the belt outer anchor cover.
| 5. CONNECT REAR NO. 1 SEAT BELT ASSEMBLY OUTER RH |
![]() |
Connect the seat belt's floor anchor with the bolt.
![]() |
Install the belt outer anchor cover.
| 6. INSTALL QUARTER TRIM HOOK |
Install the quarter trim hook with the screw.
| 7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 8. INSTALL REAR DOOR SCUFF PLATE RH |
| 9. INSTALL BACK DOOR SCUFF PLATE |
Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.
| 10. INSTALL REAR NO. 2 SEAT ASSEMBLY RH |
Fully tilt the seatback forward.
![]() |
Place the seat onto the lock striker.
Tighten the bolt on the rear side of the seat.
Tighten the bolt on the front side of the seat.
Fully lock the seat to the lock striker.
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |