Home › SUSPENSION & AXLE › SUSPENSION › REAR LOWER ARM

REAR LOWER ARM > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. TEMPORARILY INSTALL LOWER CONTROL ARM ASSEMBLY LH


    F052275E01
  1. Temporarily install the lower control arm with the bolt and nut.



    F049951E01
  1. Temporarily install the bolt and nut to the axle housing.



2. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

Torque:
26 N*m{ 260 kgf*cm , 19 ft.*lbf }



3. INSTALL REAR WHEEL

Torque:
105 N*m{ 1071 kgf*cm , 77 ft.*lbf }



4. STABILIZE SUSPENSION
  1. Lower the vehicle.

  1. Press down on the vehicle several times to stabilize the suspension.



5. TIGHTEN LOWER CONTROL ARM ASSEMBLY LH
  1. Tighten the 2 bolts.

    Torque:
    145 N*m{ 1479 kgf*cm , 107 ft.*lbf }

    HINT:
    While fixing the nuts in place, tighten the bolts.