Home
›
SUSPENSION & AXLE
›
SUSPENSION
›
REAR LOWER ARM
REAR LOWER ARM > REMOVAL
for Preparation
Click here
HINT:
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL
2. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
3. REMOVE LOWER CONTROL ARM ASSEMBLY LH
Remove the nut and bolt from the axle housing.
HINT:
While fixing the nut in place, loosen and remove the bolt.
Remove the nut, bolt and control arm.
HINT:
While fixing the nut in place, loosen and remove the bolt.