Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER

REAR SHOCK ABSORBER > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures described for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR WHEEL


2. REMOVE REAR SHOCK ABSORBER ASSEMBLY


C118719
  1. Support the axle housing.

    1. Jack up and support the vehicle's frame on stands.

    2. Lower the axle housing until the coil spring tension is free, and maintain this position.

  1. Remove the nut and 2 retainers.



    C118720
  1. Remove the 2 bolts.

  1. Disconnect the shock absorber and 2 bushes from the axle housing and frame.

  1. Remove the lock nut, bracket, 3 retainers and 2 cushions.