Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY

PERSONAL LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL MAP LIGHT BULB
  1. Install the 2 map light bulbs to the map light assembly.



2. INSTALL NO. 1 MAP LIGHT LENS
  1. Attach the claw to install No. 1 map light lens.



3. INSTALL NO. 2 MAP LIGHT LENS
  1. Attach the claw to install No. 2 map light lens.



4. INSTALL MAP LIGHT ASSEMBLY
  1. Connect the connector.

  1. Attach the 2 guides and claw.

  1. Install the 2 screws to install the map light assembly.