PERSONAL LIGHT ASSEMBLY > INSPECTION |
| 1. INSPECT MAP LIGHT ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Measurement Condition | Switch Condition | Specified Condition |
| 7 (B) - 10 (E) | Spot light switch off | 10 kΩ or higher |
| Spot light switch on | Below 1 Ω | |
| 7 (B) - 6 (CTY) | Not door position | 10 kΩ or higher |
| Door position | Below 1 Ω |
| *a | Component without harness connected (Map Light Assembly) |