Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER MOTOR

REAR WIPER MOTOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    B277751
  1. Detach the 16 clips and remove the back door trim board.



3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    E225950
  1. Open the wiper arm head cap.



    E225948
  1. Remove the nut and the arm and blade.



4. REMOVE REAR WIPER MOTOR ASSEMBLY


B117895
  1. Disconnect the connector.

  1. Remove the 3 bolts and wiper motor.



5. REMOVE REAR WIPER MOTOR GROMMET


    E225759
  1. Remove the rear wiper motor grommet.