Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (for Halogen Headlight)

HEADLIGHT ASSEMBLY (for Halogen Headlight) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE RADIATOR GRILLE


    B277882
  1. Remove the 2 clips and 2 screws.



    B277883E01
  1. Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 6 claws and remove the radiator grille.



2. REMOVE FOG LIGHT COVER LH


    B283429E01
  1. Put protective tape around the fog light cover.

  1. Using the screwdriver, detach the 8 claws and remove the fog light cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE FOG LIGHT COVER RH

HINT:
Use the same procedure described for the LH side.



4. REMOVE FRONT BUMPER COVER


    B277936
  1. Remove the 6 screws and 3 clips.



    B277938E01
  1. Put protective tape around the front bumper cover.

  1. Remove the 2 screws, 2 bolts and 5 clips.
    Text in Illustration 
    *1
    Protective Tape

  1. w/ Headlight Cleaner System:
    Disconnect the headlight cleaner hose, and then drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.

  1. w/ Fog Light:
    Disconnect the 2 fog light connectors.



    B277939
  1. Detach the 8 claws and remove the front bumper cover.



5. REMOVE HEADLIGHT ASSEMBLY LH


    E225367E01
  1. Put protective tape around the headlight assembly LH.
    Text in Illustration 
    *1
    Protective tape

  1. Remove the 3 screws and bolt.

  1. Disconnect the connectors and remove the headlight assembly LH.