Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (for Halogen Headlight)

HEADLIGHT ASSEMBLY (for Halogen Headlight) > DISASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE NO. 1 HEADLIGHT BULB


    E228178
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 1 headlight bulb from the headlight unit LH.



2. REMOVE NO. 2 HEADLIGHT BULB


    E225369
  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb from the headlight unit LH.



3. REMOVE CLEARANCE LIGHT SOCKET


    E225370
  1. Turn the clearance light socket in the direction indicated by the arrow in the illustration and remove the clearance light socket.



4. REMOVE CLEARANCE LIGHT BULB
  1. Remove the clearance light bulb from the clearance light socket.



5. REMOVE FRONT TURN SIGNAL LIGHT SOCKET


    E225371
  1. Turn the front turn signal light socket in the direction indicated by the arrow in the illustration and remove the front turn signal light socket.



6. REMOVE FRONT TURN SIGNAL LIGHT BULB
  1. Remove the front turn signal light bulb from the front turn signal light socket.



7. REMOVE HEADLIGHT BRACKET LH


    E225486
  1. Remove the 2 screws and headlight bracket LH.