Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE CONSOLE BOX ASSEMBLY
  1. Remove the console box assembly (Click here).



3. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY


C112489E01
  1. Remove the lock nut and wire adjusting nut labeled A.

  1. Remove the 2 bolts labeled B and lever (with the No. 1 parking brake cable).

  1. Bend the claw labeled C so that the cable can be removed.

  1. Remove the 2 bolts and 2 nuts labeled D.

  1. Disconnect the cable from the lever.

  1. Disconnect the parking brake switch connector.

  1. Remove the screw and switch from the lever.