POWER DOOR LOCK CONTROL SYSTEM (w/ Theft Deterrent System) > CUSTOMIZE PARAMETERS |
| Item | Default | Contents | Setting |
| Speed-sensitive automatic door lock function | ON | Function that locks all doors once when vehicle speed reaches 25 km/h (16 mph) | ON/OFF* |
| Ignition switch-linked automatic door unlock function | ON | After speed-sensitive automatic door lock function operates, turning ignition switch OFF causes doors to automatically unlock | ON/OFF* |
| 2-step unlock function | ON |
| ON/OFF |
| CUSTOMIZE METHOD FLOWCHART OF SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION AND IGNITION SWITCH-LINKED AUTOMATIC DOOR UNLOCK FUNCTION |
| 1.KEY IS NOT INSERTED INTO IGNITION KEY CYLINDER |
| |||||
| 2.INSERT KEY AND PULL OUT KEY. REPEAT ONCE WITHIN 5 SECONDS |
| |||||
| 3.PRESS AND HOLD DOWN BOTH LOCK AND UNLOCK SWITCH |
Press and hold down both lock and unlock switches on the transmitter for over 3 seconds.
| |||||
| 4.PERFORM LOCK OPERATION |
Perform the lock operation 2 times within 2 seconds.
| |||||
| 5.PERFORM UNLOCK OPERATION |
Perform the unlock operation once.
| |||||
| 6.SELECT CUSTOMIZE MODE SETTING |
| Item | Proceed to |
| Check current setting | A |
| Turn ON speed-sensitive automatic door lock function and ignition switch-linked automatic door unlock function setting | B |
| Turn OFF speed-sensitive automatic door lock function and ignition switch-linked automatic door unlock function setting | C |
| End customize mode | D |
|
| ||||
|
| ||||
|
| ||||
| |||||
| 7.CHECK CURRENT SETTING |
Perform the unlock operation once.
| Result | Setting |
| Hazard warning lights flash once | ON |
| Hazard warning lights flash twice | OFF |
|
| ||||
|---|---|---|---|---|---|
| 8.TURN FUNCTION AND SETTING ON |
Perform the lock operation once. Then perform the unlock operation again within 2 seconds
|
| ||||
|---|---|---|---|---|---|
| 9.TURN FUNCTION AND SETTING OFF |
Perform the lock operation twice. Then perform the unlock operation again within 2 seconds.
|
| ||||
|---|---|---|---|---|---|
| 10.END CUSTOMIZE MODE |
Perform the lock operation 3 times.
|
| ||||
|---|---|---|---|---|---|
| CUSTOMIZE METHOD FLOWCHART OF 2 STEP UNLOCK OPERATION |
| 1.KEY IS NOT INSERTED INTO IGNITION KEY CYLINDER |
| |||||
| 2.INSERT KEY AND PULL OUT KEY. REPEAT ONCE WITHIN 5 SECONDS |
| |||||
| 3.PRESS AND HOLD DOWN BOTH LOCK AND UNLOCK SWITCH |
Press and hold down both lock and unlock switches on the transmitter for over 3 seconds.
| |||||
| 4.PERFORM LOCK OPERATION |
Perform the lock operation 2 times within 2 seconds.
| |||||
| 5.PERFORM UNLOCK OPERATION |
Perform the unlock operation once.
| |||||
| 6.SELECT CUSTOMIZE MODE SETTING |
| Item | Proceed to |
| Check current setting | A |
| Turn on 2 step unlock function | B |
| Turn off 2 step unlock function | C |
| End customize mode | D |
|
| ||||
|
| ||||
|
| ||||
| |||||
| 7.CHECK CURRENT SETTING |
Perform the unlock operation once.
| Result | Setting |
| Hazard warning lights flash once | ON |
| Hazard warning lights flash twice | OFF |
|
| ||||
|---|---|---|---|---|---|
| 8.TURN ON 2 STEP UNLOCK FUNCTION |
Perform the lock operation once. Then perform the unlock operation again within 2 seconds.
|
| ||||
|---|---|---|---|---|---|
| 9.TURN OFF 2 STEP UNLOCK FUNCTION |
Perform the lock operation twice. Then perform the unlock operation again within 2 seconds.
|
| ||||
|---|---|---|---|---|---|
| 10.END CUSTOMIZE MODE |
Perform the lock operation 3 times.
|
| ||||
|---|---|---|---|---|---|