Home › ENGINE ยท 2TR-FE › CHARGING › GENERATOR

GENERATOR > DISASSEMBLY

for Preparation Click here



1. REMOVE GENERATOR PULLEY


    A075664E06
  1. Install SST 1-A and B to the generator rotor shaft.

    SST
    09820-63011   (09820-06010, 09820-06021)
    Item
    Part No.
    SST 1-A and B
    09820-06010
    SST 2
    09820-06021

  1. Hold SST 1-A with a torque wrench, and tighten SST 1-B clockwise with the specified torque.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }

    NOTICE:
    Make sure that SST is secured to the generator rotor shaft.



    A203850E01
  1. Mount the generator in a vise between aluminum plate.

  1. Insert SST 2 to attach it to pulley nut.



    A203851E01
  1. To loosen the pulley nut, turn SST 1-A in the direction shown in the illustration.

    NOTICE:
    To prevent damage to the rotor shaft, do not loosen the pulley nut more than one-half of a turn.

  1. Remove SST 2 from the generator.



    A075667E05
  1. Turn SST 1-A in the direction shown in the illustration, and remove SST 1-A and B.

  1. Remove the pulley nut and pulley.



2. REMOVE GENERATOR REAR END COVER


    A118436
  1. Remove the 3 nuts and rear end cover.



3. REMOVE TERMINAL INSULATOR


    A118437
  1. Remove the terminal insulator.



4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY


    A118438
  1. Remove the 2 screws and brush holder.



5. REMOVE GENERATOR COIL ASSEMBLY


    A118439
  1. Remove the 4 bolts.



    A115868E01
  1. Using SST, remove the generator coil assembly.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011)



6. REMOVE GENERATOR ROTOR ASSEMBLY
  1. Remove the washer from the generator rotor.

  1. Remove the drive end frame space collar.

  1. Remove the rotor from the drive end frame.



7. REMOVE GENERATOR DRIVE END FRAME BEARING


    A118441
  1. Remove the 4 screws and bearing retainer.



    A118442E01
  1. Using SST and a hammer, tap out the bearing.

    SST
    09950-60010   (09951-00250)
    09950-70010   (09951-07100)