Home › BODY ELECTRICAL › DOOR LOCK › BACK DOOR LOCK

BACK DOOR LOCK > INSPECTION

for Preparation Click here



1. INSPECT BACK DOOR LOCK ASSEMBLY


    B086244E06
  1. Check the operation of the back door lock.

    1. Using a screwdriver, move the latch to the full-latch position.

    2. Apply battery voltage to the back door lock and check the operation of the latch.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 4
      Battery negative (-) → Terminal 3
      Latch turns to open-latch position

      If the result is not as specified, replace the back door lock assembly.