Standard
Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
S25-1 (GND1) - Body ground
| W-B - Body ground
| Skid control ECU ground
| Always
| Below 1 Ω
|
S25-2 (STP) - Body ground
| G-W - Body ground
| Stop light switch input
| Brake pedal depressed → released
| 8 to 14 V → Below 1.5 V
|
S25-9 (EXI4)*1 - Body ground
| G-W - Body ground
| LL position switch input
| - Ignition switch ON
- Transfer shift position not LL
| 11 to 14 V
|
S25-12 (+BS) - Body ground
| W-R - Body ground
| Solenoid relay power supply
| Always
| 11 to 14 V
|
S25-13 (GND2) - Body ground
| W-B - Body ground
| Pump motor ground
| Always
| Below 1 Ω
|
S25-20 (EXI)*1 - Body ground
| R-B - Body ground
| Center differential lock position switch input
| - Ignition switch ON
- Transfer shift position H
| 11 to 14 V
|
S25-24 (BM) - Body ground
| R - Body ground
| Motor relay power supply
| Always
| 11 to 14 V
|
S25-27 (FSW+) - Body ground
| L - Body ground
| Brake pedal load sensing switch input
| Brake pedal depressed → released
| 950 to 1050 Ω → 203 to 223 Ω
|
S25-28 (EXI3) - Body ground
| V - Body ground
| - w/o Rear Differential Lock: IG power supply input
- w/ Rear Differential Lock: Rear differential lock position switch (No. 4 transfer indicator switch) signal input
| - Ignition switch ON
- w/ Rear Differential Lock: Rear differential free
| 11 to 14 V
|
S25-29 (PKB) - Body ground
| L-O - Body ground
| Parking brake switch input
| - Ignition switch ON
- Parking brake lever pulled → released
| Below 1 Ω → 10 kΩ or higher
|
S25-30 (CSW) - Body ground
| R-L - Body ground
| VSC OFF switch input
| VSC OFF switch held → released
| Below 1 Ω → 10 kΩ or higher
|
S25-32 (P)*2 - Body ground
| G-B - Body ground
| Park/neutral position switch signal input
| - Ignition switch ON
- Shift lever not in P → Shift lever in P
| Below 1 V → 11 to 14 V
|
S25-34 (IG1) - Body ground
| R-L - Body ground
| ECU power supply
| Ignition switch ON
| 11 to 14 V
|