Home › ENGINE ยท 2KD-FTV › COOLING › RADIATOR

RADIATOR > DISASSEMBLY

for Preparation Click here



1. REMOVE RADIATOR BRACKET SUB-ASSEMBLY


    A099949E02
  1. Remove the 4 bolts and 2 brackets.



2. REMOVE RADIATOR DRAIN COCK PLUG
  1. Remove the drain plug.

  1. Remove the O-ring.



3. ASSEMBLE SST


    A113337E10
  1. Install the claw to part A of the overhaul handle as shown in the illustration.

    SST
    09230-01010   (09231-01010, 09231-01030)
    Text in Illustration 
    *1
    Dimension B
    *2
    Part A
    *3
    Stopper Bolt

  1. While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.

    Dimension B:
    0.2 to 0.3 mm (0.00787 to 0.0118 in.)

    NOTICE:
    If this adjustment is not performed, the claw will be damaged.



4. UNCAULK LOCK PLATE


    A113338E05
  1. Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.

    SST
    09230-01010   (09231-01010, 09231-01030)
    Text in Illustration 
    *1
    Tank
    *2
    Lock Plate



5. REMOVE UPPER RADIATOR TANK AND LOWER RADIATOR TANK


    A099688E01
  1. Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tanks.

  1. Remove the O-ring.