Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR COOLING UNIT

REAR COOLING UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 COOLER AIR DUCT


E171278
  1. Remove the 3 screws and air duct.



2. REMOVE BLOWER RESISTOR


    I043473E01
  1. Remove the 2 screws and blower resistor.



3. REMOVE NO. 2 COOLER UNIT DRAIN HOSE


    I043760E01
  1. Remove the drain hose.



4. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


    I043703E01
  1. Remove the 3 screws and blower with fan motor.



5. REMOVE AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY


    I043704E01
  1. Remove the 9 screws.

  1. Detach the 3 claws and remove the cooling unit case (motor side).

  1. Remove the evaporator sub-assembly from the cooler unit case (sink side).



    I043705E01
  1. Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts and air conditioner tube and accessory assembly.

  1. Remove the 2 O-rings from the air conditioner tube and accessory assembly.



6. REMOVE REAR COOLING UNIT EXPANSION VALVE


    I043706E01
  1. Remove the expansion valve from the evaporator sub-assembly.

  1. Remove the 2 O-rings from the evaporator sub-assembly.