Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › REAR COOLING UNIT

REAR COOLING UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL REAR COOLING UNIT EXPANSION VALVE
  1. Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

    Compressor oil:
    ND-OIL 8 or equivalent



    I043706E01
  1. Install the 2 O-rings to the evaporator sub-assembly.

  1. Install the expansion valve to the evaporator sub-assembly.



2. INSTALL AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
  1. Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

    Compressor oil:
    ND-OIL 8 or equivalent



    I043705E01
  1. Install the 2 O-rings to the air conditioner tube and accessory assembly.

  1. Using a 4 mm socket hexagon wrench, install the air conditioner tube and accessory assembly to the evaporator with the 2 hexagon bolts.

    Torque:
    3.4 N*m{ 34 kgf*cm , 30 in.*lbf }



    I043704E01
  1. Attach the 3 claws to install the cooling unit case (motor side).

  1. Install the 9 screws.



3. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY


I043703
  1. Install the blower with fan motor with the 3 screws.



4. INSTALL NO. 2 COOLER UNIT DRAIN HOSE


I043760
  1. Install the drain hose.



5. INSTALL BLOWER RESISTOR


I043473
  1. Install the blower resistor with the 2 screws.



6. INSTALL NO. 1 COOLER AIR DUCT


E171278
  1. Install the air duct with the 3 screws.