Home › SECURITIES › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION



1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


  1. for LHD:



      E225118E01
    1. Measure the resistance of according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - 2
      Unlock position
      10 kΩ or higher
      1 - 2
      Lock position
      Below 1 Ω

      If the result is not as specified, replace the hood lock assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (Hood Lock Assembly)
      *b
      Unlock Position
      *c
      Lock Position



  1. for RHD:



      E225119E01
    1. Measure the resistance of according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - 2
      Unlock position
      Below 1 Ω
      1 - 2
      Lock position
      10 kΩ or higher

      If the result is not as specified, replace the hood lock assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (Hood Lock Assembly)
      *b
      Unlock Position
      *c
      Lock Position