EXHAUST PIPE > INSTALLATION |
| 1. INSTALL FRONT EXHAUST PIPE SUB-ASSEMBLY |
Install a new gasket to the front exhaust pipe.
Temporarily install the pipe support and clamp to the front exhaust pipe with the bolt.
Install the front exhaust pipe to the exhaust manifold with 3 new nuts. Alternately tighten the nuts in several passes.
Install the pipe support to the transmission with the 2 bolts.
Tighten the pipe support's clamp with the bolt.
Install the front fender seal LH with the 5 clips.
| 2. INSTALL FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY |
![]() |
Using a vernier caliper, measure the free length of the compression spring.
![]() |
Install a new gasket to the front exhaust pipe.
Install the front No. 2 exhaust pipe to the pipe support.
Install the front No. 2 exhaust pipe to the front exhaust pipe with the 2 compression springs and 2 bolts. Alternately tighten the bolts in several passes.
| 3. INSTALL CENTER EXHAUST PIPE ASSEMBLY |
Install the center exhaust pipe to the 3 exhaust pipe supports.
Install a new gasket and the center exhaust pipe to the front No. 2 exhaust pipe with the 2 bolts and 2 new nuts. Alternately tighten the bolts in several passes.
| 4. INSTALL TAILPIPE ASSEMBLY |
Install the tailpipe to the exhaust pipe support.
Install a new gasket and the tailpipe to the center exhaust pipe with the 2 bolts and 2 new nuts. Alternately tighten the bolts in several passes.
| 5. CHECK FOR EXHAUST GAS LEAKS |