Home › ENGINE ยท 1GR-FE › LUBRICATION › ENGINE OIL COOLER

ENGINE OIL COOLER > REMOVAL

for Preparation Click here



1. DRAIN ENGINE COOLANT


  1. Remove the radiator cap.


    A110401E01

  1. Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



2. REMOVE V-BANK COVER


    A112983
  1. Remove the 2 nuts and V-bank cover.



3. REMOVE OIL FILTER


    A076806E01
  1. Remove the drain pipe cap.

  1. While removing the oil filter with SST, collect the oil from the oil filter in a container.

    SST
    09228-07501  

  1. Install the drain pipe cap.

  1. Clean the container.



4. REMOVE ENGINE OIL COOLER
  1. Disconnect the 2 hoses from the oil cooler.



    A076453E02
  1. Remove the union bolt, plate washer and oil cooler.

  1. Remove the O-ring from the oil cooler.



5. REMOVE OIL FILTER BRACKET
  1. Remove the 2 nuts, 3 bolts, oil filter bracket and O-ring.