Home › ENGINE ยท 1GR-FE › LUBRICATION › ENGINE OIL COOLER

ENGINE OIL COOLER > REMOVAL

for Preparation Click here



1. DRAIN ENGINE COOLANT


  1. Remove the radiator cap.


    A270641E01

  1. Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



2. REMOVE V-BANK COVER


    A112983
  1. Remove the 2 nuts and V-bank cover.



3. REMOVE OIL FILTER


    A076806E01
  1. Remove the drain pipe cap.

  1. While removing the oil filter with SST, collect the oil from the oil filter in a container.

    SST
    09228-07501  

  1. Install the drain pipe cap.

  1. Clean the container.



4. REMOVE ENGINE OIL COOLER
  1. Disconnect the 2 hoses from the oil cooler.



    A076453E02
  1. Remove the union bolt, plate washer and oil cooler.

  1. Remove the O-ring from the oil cooler.



5. REMOVE OIL FILTER BRACKET
  1. Remove the 2 nuts, 3 bolts, oil filter bracket and O-ring.