Home › ENGINE ยท 5L-E › FUEL › FUEL INJECTION PUMP

FUEL INJECTION PUMP > DISASSEMBLY

for Preparation Click here



1. MOUNT INJECTION PUMP ASSEMBLY


    B013328E01
  1. Mount the injection pump to SST.

    SST
    09241-76022  
    09245-54010  



2. REMOVE NO. 4 NOZZLE LEAKAGE PIPE


    A070790E01
  1. Remove the overflow screw, nozzle leakage pipe and 2 washers.



3. REMOVE FUEL FILTER TO INJECTION PUMP FUEL PIPE
  1. Remove the cap nut, fuel pipe and 2 washers.

  1. Remove the fuel inlet hollow screw and washer.



4. REMOVE TIMING CONTROL VALVE


    B013327E01
  1. Using a 5 mm hexagon wrench, remove the 2 bolts and timing control valve.



5. REMOVE FUEL TEMPERATURE SENSOR


    B013326E01
  1. Using a 19 mm deep socket wrench, remove the fuel temperature sensor.



6. REMOVE DISTRIBUTIVE HEAD PLUG


    B013112E01
  1. Using SST, remove the distributive head plug.

    SST
    09260-54012   (09262-54010)



7. REMOVE DELIVERY VALVE


    B013113E01
  1. Using SST, remove the 4 delivery valve holders and springs.

    SST
    09260-54012   (09269-54020)

  1. Remove the 4 delivery valves and gaskets.

    NOTICE:
    Do not touch the sliding surfaces of the delivery valves with your hand.

    HINT:
    Arrange the delivery valves, springs, and holders in the order they were removed.