Home › ENGINE ยท 5L-E › FUEL › FUEL INJECTION PUMP

FUEL INJECTION PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL DELIVERY VALVE HOLDER


    S004413E01
  1. Install new gaskets and the valves into the distributive head.

  1. Install the springs into the 4 delivery valve holders.

  1. Using SST, install the delivery holders.

    SST
    09260-54012   (09269-54020)

    Torque:
    59 N*m{ 602 kgf*cm , 43 ft.*lbf }



2. INSTALL DISTRIBUTIVE HEAD PLUG


    B013114E02
  1. Install a new O-ring to the distributive head plug.

  1. Using SST, install the head plug.

    SST
    09260-54012   (09262-54010)

    Torque:
    88 N*m{ 900 kgf*cm , 65 ft.*lbf }



3. INSTALL FUEL TEMPERATURE SENSOR


    B013326E01
  1. Install a new O-ring to the fuel temperature sensor.

  1. Using a 19 mm deep socket wrench, install the fuel temperature sensor.

    Torque:
    22 N*m{ 224 kgf*cm , 16 ft.*lbf }



4. INSTALL TIMING CONTROL VALVE


    B013327E01
  1. Using a 5 mm hexagon wrench, install the timing control valve with the 2 bolts.



5. INSTALL FUEL FILTER TO INJECTION PUMP FUEL PIPE


    A070790E01
  1. Install a new washer and the hollow screw.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Install the fuel pipe with 2 new washers and the cap nut.

    Torque:
    27 N*m{ 271 kgf*cm , 20 ft.*lbf }



6. INSTALL NO. 4 NOZZLE LEAKAGE PIPE
  1. Install the nozzle leakage pipe with 2 new washers and the overflow screw.

    Torque:
    27 N*m{ 271 kgf*cm , 20 ft.*lbf }