FUEL INJECTION NOZZLE > REASSEMBLY |
| 1. INSTALL NOZZLE RETAINING NUT |
![]() |
Install the pressure pin, distance piece and nozzle assembly to the nozzle retaining nut.
Install the washer to the nozzle holder, and temporarily tighten the nozzle holder to the nozzle retaining nut.
Using SST, tighten the nozzle retaining nut.
Inspect the holder and nozzle set.
| 2. INSTALL RING PACKING SETTING NUT |
Install a new washer and ring packing setting nut.