Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW MASTER SWITCH (for RHD)

POWER WINDOW MASTER SWITCH (for RHD) > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY


  1. Measure the resistance of the power switch.


    B112778E04


    Standard resistance:
    for Driver switch:

    Tester Connection
    Window Lock Switch Condition
    Switch Condition
    Specified Condition
    3 (E) - 9 (DD), 4 (DU) - 6 (B)
    Always
    (ON / OFF)
    UP
    Below 1 Ω
    3 (E) - 4 (DU), 3 (E) - 9 (DD)
    Always
    (ON / OFF)
    OFF
    Below 1 Ω
    3 (E) - 4 (DU), 6 (B) - 9 (DD)
    Always
    (ON / OFF)
    DOWN
    Below 1 Ω
    3 (E) - 4 (DU), 6 (B) - 9 (DD)
    Always
    (ON / OFF)
    AUTO DOWN
    Below 1 Ω
    for Front passenger switch:

    Tester Connection
    Window Lock Switch Condition
    Switch Condition
    Specified Condition
    3 (E) - 13 (PD), 6 (B) - 10 (PU)
    OFF
    UP
    Below 1 Ω
    3 (E) - 10 (PU), 3 (E) - 13 (PD)
    OFF
    OFF
    Below 1 Ω
    3 (E) - 10 (PU), 6 (B) - 13 (PD)
    OFF
    DOWN
    Below 1 Ω
    3 (E) - 13 (PD)
    ON
    UP
    10 kΩ or higher
    6 (B) - 10 (PU)
    Below 1 Ω
    10 (PU) - 13 (PD)
    ON
    OFF
    Below 1 Ω
    3 (E) - 10 (PU)
    ON
    DOWN
    10 kΩ or higher
    6 (B) - 13 (PD)
    Below 1 Ω
    for Rear LH switch:

    Tester Connection
    Window Lock Switch Condition
    Switch Condition
    Specified Condition
    3 (E) - 12 (RLD), 6 (B) - 18 (RLU)
    OFF
    UP
    Below 1 Ω
    3 (E) - 18 (RLU), 3 (E) - 12 (RLD)
    OFF
    OFF
    Below 1 Ω
    3 (E) - 18 (RLU), 6 (B) - 12 (RLD)
    OFF
    DOWN
    Below 1 Ω
    3 (E) - 12 (RLD)
    ON
    UP
    10 kΩ or higher
    6 (B) - 18 (RLU)
    Below 1 Ω
    18 (RLU) - 12 (RLD)
    ON
    OFF
    Below 1 Ω
    3 (E) - 18 (RLU)
    ON
    DOWN
    10 kΩ or higher
    6 (B) - 12 (RLD)
    Below 1 Ω
    for Rear RH switch:

    Tester Connection
    Window Lock Switch Condition
    Switch Condition
    Specified Condition
    3 (E) - 15 (RRD), 6 (B) - 16 (RRU)
    OFF
    UP
    Below 1 Ω
    3 (E) - 16 (RRU), 3 (E) - 15 (RRD)
    OFF
    OFF
    Below 1 Ω
    3 (E) - 16 (RRU), 6 (B) - 15 (RRD)
    OFF
    DOWN
    Below 1 Ω
    3 (E) - 15 (RRD)
    ON
    UP
    10 kΩ or higher
    6 (B) - 16 (RRU)
    Below 1 Ω
    16 (RRU) - 15 (RRD)
    ON
    OFF
    Below 1 Ω
    3 (E) - 16 (RRU)
    ON
    DOWN
    10 kΩ or higher
    6 (B) - 15 (RRD)
    Below 1 Ω

    1. If the result is not as specified, replace the switch assembly.



    B085830E01
  1. Apply battery voltage to the master switch and check that the AUTO light illuminates.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 6 (B)
    Battery negative (-) → Terminal 3 (E)
    AUTO light illuminates

    1. If the result is not as specified, replace the switch assembly.