Home › ENGINE ยท 2TR-FE › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP ROTOR SET


    A097981E01
  1. Coat the oil pump rotor set with engine oil and place it into the pump body with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.



2. INSTALL OIL PUMP COVER


    A087020E01
  1. Install the oil pump cover with the 7 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }



3. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the relief valve with engine oil.



    A086864E01
  1. Install the relief valve and spring into the pump body hole.

  1. Install a new gasket to the plug.

  1. Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }