Home › ENGINE ยท 1KD-FTV › ENGINE MECHANICAL › ENGINE ASSEMBLY

ENGINE ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT INTAKE MANIFOLD


A098945E01
  1. Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.

    Maximum warpage:
    0.40 mm (0.0157 in.)

    If the warpage is greater than the maximum, replace the manifold.



2. INSPECT EXHAUST MANIFOLD


A098949E01
  1. Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.

    Maximum warpage:
    0.40 mm (0.0157 in.)

    If the warpage is greater than the maximum, replace the manifold.