Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT LEVELING SWITCH

HEADLIGHT LEVELING SWITCH > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. REMOVE NO. 1 SWITCH HOLE BASE


    E232432E01
  1. Put protective tape around the No. 1 switch hole base.
    Text in Illustration 
    *1
    Protective Tape

  1. Using moulding remover D, detach the 5 claws and remove the No. 1 switch hole base.

  1. Disconnect the connectors.



2. REMOVE HEADLIGHT LEVELING SWITCH


    E232433
  1. Detach the 2 claws and remove the headlight leveling switch.