BACK DOOR COURTESY SWITCH > INSTALLATION |
| 1. INSTALL BACK DOOR LOCK ASSEMBLY |
![]() |
Temporarily install the back door lock assembly with the 3 bolts.
Tighten the bolts in the order shown in the illustration.
Attach the back door lock cable assembly.
Connect the clamp and connect the connector.

| *1 | Back Door Lock Cable Assembly | - | - |
| 2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY |
Attach the 16 clips to install the back door trim board.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |